IP V4环境下部署WireGuard服务端 github项目地址部署WireGuard docker 服务端登录SSH 一键部署命令docker run --detach \ --name wg-easy \ --env LANG=de \ --env WG_HOST=luoweihua.cn \ --env WG_ALLOWED_IPS=192.168.8.0/24 \ --env WG_DEFAULT_ADDRESS=10.11.0.0 \ --env WEBUI_HOST=0.0.0.0 \ --env PASSWORD_HASH='$2b$12$coPqCsPtcFO.Ab99xylBNOW4.Iu7OOA2/ZIboHN6/oyxca3MWo7fW' \ --env PORT=51821 \ --env WG_PORT=51820 \ --volume /mnt/H1/wireguard:/etc/wireguard \ --publish 51820:51820/udp \ --publish 51821:51821/tcp \ --cap-add NET_ADMIN \ --cap-add SYS_MODULE \ --sysctl 'net.ipv4.conf.all.src_valid_mark=1' \ --sysctl 'net.ipv4.ip_forward=1' \ --restart unless-stopped \ ghcr.io/wg-easy/wg-easy这里设置的密码是: YOUR_PASSWORD生成密码的方式docker run --rm -it ghcr.io/wg-easy/wg-easy wgpw 'YOUR_PASSWORD'其它补充命令#停止服务# docker stop wg-easy #删除容器# docker rm wg-easy #更新容器# docker pull ghcr.io/wg-easy/wg-easy 登录WG后台，添加客户端

安装docker时报错(0x0010): DB version too old [0.23], expected [0.24] for domain implicit_files! 安装docker时报错(0x0010): DB version too old [0.23], expected [0.24] for domain implicit_files!错误提示[sss_cache] [sysdb_domain_cache_connect] (0x0010): DB version too old [0.23], expected [0.24] for domain implicit_files! Higher version of database is expected! In order to upgrade the database, you must run SSSD. Removing cache files in /var/lib/sss/db should fix the issue, but note that removing cache files will also remove all of your cached credentials. Could not open available domains [sss_cache] [sysdb_domain_cache_connect] (0x0010): DB version too old [0.23], expected [0.24] for domain implicit_files! Higher version of database is expected! In order to upgrade the database, you must run SSSD. Removing cache files in /var/lib/sss/db should fix the issue, but note that removing cache files will also remove all of your cached credentials. Could not open available domains解决方法如果系统上没有运行 sssd.service，只需启动一次 sssd.service，即可升级数据库。systemctl status sssd.service systemctl start sssd.service systemctl stop sssd.service systemctl status sssd.service注意：如果没有 /etc/sssd/sssd.conf，则需要按如下方式创建，之后应将其删除ls -l /etc/sssd/sssd.conf cat << 'EOF' > /etc/sssd/sssd.conf [sssd] enable_files_domain = true EOF chmod 600 /etc/sssd/sssd.conf根因有可能是经过sssd版本升级造成的问题，比如sssd-2.3升级到sssd-2.5，或者文件被修改也会产生该问题，只要重新启停sssd.service服务即可解决。

rc.local中的命令不能执行 问题描述在使用较新版本的Ubuntu系统中，之前写入rc.local的开机执行命令不执行了。经探究发现，Ubuntu自18.04版本后改用systemd管理系统，不再用initd管理系统，默认也没有/etc/rc.local文件。问题分析先用systemctl status rc-local查看状态设置rc-local开机自启，输出如下错误信息：systemctl enable rc-local大概意思是rc-local服务文件没有install字段的相关信息，这些相关信息包括WantedBy, RequiredBy, Also, Alias。如果不写则系统不认为它是一个systemd服务。打开文件/lib/systemd/system/rc-local.service(如无此文件则新建)，做如下配置：[Unit] Description=/etc/rc.local Compatibility Documentation=man:systemd-rc-local-generator(8) ConditionFileIsExecutable=/etc/rc.local After=network.target [Service] Type=forking ExecStart=/etc/rc.local start TimeoutSec=0 RemainAfterExit=yes GuessMainPID=no [Install] WantedBy=multi-user.target # 指的是表示该服务所属 target Alias=rc-local.service其中Unit字段描述服务的启动顺序&依赖关系，Service字段描述如何启动，Install字段描述如何安装该服务。打开/etc/rc.local输入如下内容echo "rc.local was executed on $(date)" >> /var/log/rc.local.log给文件权限chmod +x /etc/rc.d/rc.local重启系统reboot查看日志是否有输出.有则搞定cat /var/log/rc.local.log

Linux安装Openvpn客户端.实现两台不同网络NAS互相访问 Linux安装Openvpn客户端.实现两台不同网络NAS互相访问注: 如果机器已经安装了openvpn,那么他是自带有客户端程序的操作步骤安装openvpn客户端通过yum或者源码安装openvpn, 安装过则跳过[root@lolicp ~]# yum install openvpn上传配置将ovpn配置文件上传至/etc/openvpn/client目录，并重命名为client.conf。可以直接把ovpn后缀直接改成conf后缀启动openvpn查看启动脚本[root@lolicp ~]# cat /usr/lib/systemd/system/openvpn-client@.service [Unit] Description=OpenVPN tunnel for %I After=syslog.target network-online.target Wants=network-online.target Documentation=man:openvpn(8) Documentation=https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage Documentation=https://community.openvpn.net/openvpn/wiki/HOWTO [Service] Type=notify PrivateTmp=true WorkingDirectory=/etc/openvpn/client ExecStart=/usr/sbin/openvpn --suppress-timestamps --nobind --config %i.conf CapabilityBoundingSet=CAP_IPC_LOCK CAP_NET_ADMIN CAP_NET_RAW CAP_SETGID CAP_SETUID CAP_SYS_CHROOT CAP_DAC_OVERRIDE LimitNPROC=10 DeviceAllow=/dev/null rw DeviceAllow=/dev/net/tun rw ProtectSystem=true ProtectHome=true KillMode=process [Install] WantedBy=multi-user.target启动openvpn,其中client为实例名称[root@lolicp ~]# systemctl start openvpn-client@client.service

LNMP安装swoole插件出错解决办法 报错内容Connecting to soft.lnmp.com (soft.lnmp.com)|43.159.69.110|:443... connected. HTTP request sent, awaiting response... 404 Not Found 2024-11-19 10:40:42 ERROR 404: Not Found. Uncompress swoole-5.1.1.tgz... tar (child): swoole-5.1.1.tgz: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now cd swoole-5.1.1... include/main.sh: line 783: cd: swoole-5.1.1: No such file or directory Cannot find config.m4. Make sure that you run '/usr/local/php/bin/phpize' in the top level source directory of the module include/php_swoole.sh: line 22: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. /mnt/H1/lnmp2.1/src Restarting php-fpm...... Gracefully shutting down php-fpm . done Starting php-fpm [19-Nov-2024 10:40:43] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library 'swoole.so' (tried: /usr/local/php/lib/php/extensions/no-debug-non-zts-20230831/swoole.so (/usr/local/php/lib/php/extensions/no-debug-non-zts-20230831/swoole.so: cannot open shared object file: No such file or directory), /usr/local/php/lib/php/extensions/no-debug-non-zts-20230831/swoole.so.so (/usr/local/php/lib/php/extensions/no-debug-non-zts-20230831/swoole.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0 done PHP Swoole install failed!解决办法看情况是找不到 安装包. 那么我们自己上传就好了.下载地址http://pecl.php.net/package/swoole{cloud title="下载链接" type="default" url="http://pecl.php.net/package/swoole" password=""/}找到对应的版本 下载下来 ,上传到 LNMP的SRC目录

VM创建虚拟机磁盘少了，增加磁盘后Linux上不可见，你需要这样做 前言在EXSI或者VM虚拟机管理中已经添加了某虚拟机的磁盘容量,但是登录Linux后发现磁盘还是之前的大小，需要手动去分区挂载磁盘1、先查看磁盘容量大小根目录只有6.8G可用，但是在虚拟机上已经将磁盘增加至30GB在机器上使用fdisk -l查看，/dev/sda磁盘的大小又是增加了的2、创建新的分区使用命令，将/dev/sda未使用的磁盘空间，创建新的分区依次输入m查看选项，n创建新的分区，p创建主分区，剩余选项回车使用默认选项确定分区大小创建完成后，输入w，保存分区信息退出重启机器，这样才能格式化磁盘3、扩展centos卷查看卷名 vgdisplay使用命令将/dev/sda3分区格式化为物理卷pvcreate /dev/sda3使用命令将centos卷组增加物联卷/dev/sda3vgextend centos_master02 /dev/sda34、扩展根目录使用命令查看可扩展的分区lvdisplay使用命令添加全部可用空间至指定分区lvextend -l+100%FREE /dev/centos_master02/root /dev/sda3xfs_growfs /dev/centos_master02/root扩容完成注意：如果是ubuntu的系统，那么仅最后一步不一样，使用命令重新计算lv卷大小，查看更新成功resize2fs /dev/ubuntu-vg/ubuntu-lv

Reqable(黄鸟抓包)（Windows Mac Linux Android iOS五个系统版本） Reqable是一款跨平台的专业HTTP开发和调试工具，在全平台支持HTTP1、HTTP2和HTTP3(QUIC)协议，简单易用、功能强大、性能高效，助力程序开发和测试人员提高生产力！本产品需要一定的网络基础知识，适合开发、测试、网络、安全、爬虫等工程专业人员使用，或者在专业人员的指导下使用。软件截图下载地址{cloud title="百度网盘" type="bd" url="https://pan.baidu.com/s/1YuH9PqO3Yay08qjuQg8-dA?pwd=sb37" password="sb37"/}{cloud title="夸克网盘一" type="quark" url="https://pan.quark.cn/s/d377942b7283" password=""/}{cloud title="夸克网盘二" type="quark" url="https://pan.quark.cn/s/b6ba90c3eba5" password=""/}

斐讯N1webpad2.0固件,以及刷机Armbian用到固件等 斐讯N1webpad2.0固件,以及刷机Armbian用到固件等下载地址{cloud title="189天翼云盘（访问码：xag5）" type="default" url="https://cloud.189.cn/web/share?code=JF7v22Rr6bYr" password=""/}